Views: 10 Author: Site Editor Publish Time: 2012-09-06 Origin: Site
Transformer Oil Purifiers
High Vacuum Oil Purifier & Transformer Dry-out System
Model ZYD Series
Purification of Electrical Insulating Liquids
Today's state-of-the-art electrical equipment requires the need for a high degree of insulating fluid purification. Such requirements call for the removal of moisture, gases, solid particulate matter and traces of chemical contamination from the insulating fluid.
Moisture content is recognized as one of the main causes of variation in the electrical properties of insulating materials, both from a chemical and physical point of view. Even in small amounts, moisture can accelerate the aging process.
Under these circumstances, it is important to start initially at the factory with a dry insulation system and pure, dry and degasified dielectric liquid during transformer impregnation and the qualification tests. Later, the same care must be taken during installation in the field and after every maintenance check, requiring exposure of the insulating system to the environment.
TOP upgrades new insulating liquids and reclaims used dielectric oils through filtration, vacuum dehydration, degasification and clay treatment (when necessary).
TOP Systems include filters with a 1 to 5 micron nominal filtration rating for the removal of particulate. If excessive free water is present in oil, our company use vacuum dehydration. The TOP High Vacuum Process then removes dissolved water, free and absorbed air and other gases.
The TOP Fuller's Earth Filters provide corrective treatment for removal of the products of oxidation, dissolved varnish and gums and other traces of chemical contaminants.
TOP Systems with High Vacuum Pumps provide fast and complete transformer dry-out and fill with clean, dry and hot oil under vacuum conditions. TOP Interstage Oil Condensers provide a continuous system for removal of light-end oils for vacuum system protection during transformer dry-out processes.