Views: 9 Author: Site Editor Publish Time: 2013-10-25 Origin: Site
The main sources of pollutants:
(1) system internal residues: residues in the manufacturing or assembly process within the system chip, welding slag, sand;
(2) within the system to generate: Component Movement Vice friction generated between the wear debris, surface rust piece of rust generated;
(3) of the system outside intrusion: stretched out from the tank openings or lubricating cylinder piston rod end into the dust;
(4) maintenance of air pollution caused by: disassembly;
The 5μm around the particles stuck spool, plug the orifice, the main reason of the deposition system. Particles larger than 15μm will lead to clogging of the orifice and accelerated component wear. The greatest threat to the death of the spool and the column Fonseca is considered to be close to the spool and the piston radial clearance size of solid particles.
All of the above, I recommend our Series TYA lubricating vacuum oil purifier which can quickly removal of water in the oil, gas, impurities and volatile matter (gasoline, diesel, kerosene, etc.).Improve the oil quality, restores the lubricating oil viscosity, flash point, and the use of performance.To make sure the normal operation of hydraulic
systems, power systems, lubrication system.